Almost there...
Team
Your entry is missing some details. You can come back and fill in the details later.
You are not showing up on the race tracker yet. Please get your tracker device working before the last minute.
You have over paid and are owed a refund. Please contact us.
You are on the wait list and have paid more than the wait list fee. Please contact us.
You need to pay to be put on the wait list.
You are fully paid
You are on the wait list
Solo entries must have raced before or had their paddling and wilderness experience resumé approved before they can enter.
You can use your entry invitation token to claim your slot in the race
It has been over an hour. Press back and submit again it you want to pay
Entry for 2022 Yukon River Quest
This page is designed for devices with a minimum width of about 640px. If you are using it on a phone, try using landscape
Solo entries cannot register unless they are returning paddlers or have submitted paddling resumes that convince the organizers that they have sufficient paddling and remote wilderness experience.
Registration closed on
2022-06-03
Please try again next year
- Entry
- 1st Paddler
- 2nd Paddler
- 3rd Paddler
- 4th Paddler
- 5th Paddler
- 6th Paddler
- 7th Paddler
- 8th Paddler
- 9th Paddler
- 10th Paddler
- 11th Paddler
- 12th Paddler
- Team
- 1st Boat
- 2nd Boat
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
This information will not be published, except for the Name, State/Province/Territory or County, and Country.
Age (optional): |
◄ Age must be
between 15 and 99 |
Sex: |
◄ Required
|
Shirt Size: |
◄ Required
|
(max size 2MB)
Any Sponsors you may have, and anything you might want to say about them. If you include a URL, it will be rendered as a link.
Any charities you may be raising money for, and anything you mights want to say about them. If you include a URL, it will be rendered as a link.
(max size 2MB)
Please give a description of your boat (if you know it) to help identify you on the river.
(eg https://share.garmin.com/feed/Share/FredBloggs or https://us0-share.inreach.garmin.com/Sploop)
Only specify a password if you set on on your inReach map share
(eg 0R3Vu6ZLP4p1F7CMlhLTvFeBQ3vzj82UP) ?
Help on Creating a findmespot.com XML Feed
If you have an annual subscription from findmespot.com then you need to set up an XML Feed for the Yukon River Quest to be able to retrieve your tracking data.
What is an XML Feed? An XML Feed allows us to get the latest locations from your Spot. When setup correctly, the Yukon River Quest retrieves the data every few minutes from your XML Feed.
To set up an XML Feed follow the steps below:
1. Login to your account at login.findmespot.com (opens in a new window)
2. Enter your username and password
3. Click on the Login button, you will be taken to the My Devices tab
4. Click on the XML Feed link at the top right
5. Click on the "Create XML Feed" link at the top right
6. In the "XML Feed Name" box enter a name (this can be anything you like)
7. In the Devices box make sure there is a tick beside the SPOT device you want to use for the Yukon River Quest. Please select only one.
8. Make sure all the messages are ticked beside "Location Messages to Share"
9. Set "Share GPS Locations from the Last" to 1 Day (recommended)
10. Do not set "Share Message Detail"(optional)
11. If you would prefer viewers and MAProgress to enter a password to view your tracking select "Make XML page private" in "Security".
If private, enter the password you would like to use, this password will also be used in the Yukon River Quest - please do not use a password you would use elsewhere.
If you set a password, you must enter in in the password field in your the Yukon River Quest profile as well
12. Click on the Create button
13. A message box will display with "Your XML Feed ID:", copy this to the clipboard (double-click to select then press Ctrl+C)
14. In this registration form paste (Ctrl+V) the XML Feed ID
Only specify a password if you set on on your Spot XML feed
(eg https://share.garmin.com/feed/Share/FredBloggs or https://us0-share.inreach.garmin.com/Sploop)
Only specify a password if you set on on your inReach map share
(eg 0R3Vu6ZLP4p1F7CMlhLTvFeBQ3vzj82UP) ?
Help on Creating a findmespot.com XML Feed
If you have an annual subscription from findmespot.com then you need to set up an XML Feed for the Yukon River Quest to be able to retrieve your tracking data.
What is an XML Feed? An XML Feed allows us to get the latest locations from your Spot. When setup correctly, the Yukon River Quest retrieves the data every few minutes from your XML Feed.
To set up an XML Feed follow the steps below:
1. Login to your account at login.findmespot.com (opens in a new window)
2. Enter your username and password
3. Click on the Login button, you will be taken to the My Devices tab
4. Click on the XML Feed link at the top right
5. Click on the "Create XML Feed" link at the top right
6. In the "XML Feed Name" box enter a name (this can be anything you like)
7. In the Devices box make sure there is a tick beside the SPOT device you want to use for the Yukon River Quest. Please select only one.
8. Make sure all the messages are ticked beside "Location Messages to Share"
9. Set "Share GPS Locations from the Last" to 1 Day (recommended)
10. Do not set "Share Message Detail"(optional)
11. If you would prefer viewers and MAProgress to enter a password to view your tracking select "Make XML page private" in "Security".
If private, enter the password you would like to use, this password will also be used in the Yukon River Quest - please do not use a password you would use elsewhere.
If you set a password, you must enter in in the password field in your the Yukon River Quest profile as well
12. Click on the Create button
13. A message box will display with "Your XML Feed ID:", copy this to the clipboard (double-click to select then press Ctrl+C)
14. In this registration form paste (Ctrl+V) the XML Feed ID
Only specify a password if you set on on your Spot XML feed
Phone number of any sat phone you will take with you. for Iridium phones use the format +8816 xxx xxxx. For Globalstar phones specify the country code and number, eg +1 403 555 1212
Email addresses are collected for race communications only. We do not give them away or sell them for any purposes.
We do provide a facility for people to send you email messages through the race, but without revealing your email address. We will be able to get such email messages to you at Whitehorse, Carmacks and Dawson. If you want to opt out of this, check the "limited email" box.
Your entry details have been saved.
If you are fully paid, you can see your entry here.